It is currently Sun 23 Sep 2018 12:34 am

All times are UTC + 7 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: PIR Motion Sensor Light 15 LED (Modified Delay Timer)
PostPosted: Tue 13 Mar 2018 1:34 pm 
Offline
Site Admin

Joined: Fri 01 May 2009 8:55 pm
Posts: 2093
01.jpg

02.jpg


Top
 Profile  
 
 Post subject: Re: PIR Motion Sensor Light 15 LED (Modified)
PostPosted: Tue 13 Mar 2018 1:41 pm 
Offline
Site Admin

Joined: Fri 01 May 2009 8:55 pm
Posts: 2093
TM2291.png

TM2291

Pin 1 connect to VDD (+) = Retriggerable
Pin 1 connect to VSS (-) = Non-Retriggerable


Top
 Profile  
 
 Post subject: Re: PIR Motion Sensor Light 15 LED (Modified)
PostPosted: Tue 13 Mar 2018 9:24 pm 
Offline
Site Admin

Joined: Fri 01 May 2009 8:55 pm
Posts: 2093
22.png

21.png

Tx is LED On timer. 
Factory default is 36 second.

Tx = 40,000 x R2 (Ω) x C1 (F)
= 40,000 x 180,000 x 5 nF x 10-9
= 4 x 1.8 x 5
= 36 second


Ti is inhibit movement after LED Off timer. 
Factory default is 5.8 second.

Ti = 56 x R3 (Ω) x C2 (F)
= 56 x 2,200,000 x 47 nF x 10-9
= 5.8 second


Modified

I cut out the blue line and connect Pin 1 to V+ but it short circuit the batteries V+ to Ground. It's possible that there is some track under the IC. So can't config as retriggerable.

Next modified R2 to 475K + 475K in series.

Tx = 40,000 x R2 (Ω) x C1 (F)
= 40,000 x 950,000 x 5 nF x 10-9
= 4 x 9.5 x 5
= 190 second


Next modified R3 to 100K + 2.2M in parallel.

Ti = 56 x R3 (Ω) x C2 (F)
= 56 x 95,652 x 47 nF x 10-9
= 0.25 second


23.jpg


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 7 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: